![]() To boot the macOS USB drive, press F12 to have access to the boot menu. Once that is done, now it's time to boot, change some settings in the BIOS and install macOS Mojave.įor me, to get a fully bootable Clover setup took me a long time to get working with all of the stuff that I wanted to have working. Once mounted, then simply copy and paste the Clover EFI folder into the EFI partition of the USB drive. All you want to do is mount the EFI partition using a program called ESP Mounter Pro. Once that is done, let's move onto the next step.ģ/ Putting the EFI folder into the EFI partition of the USB: Once the USB command is then copied into Terminal, you'll want to wait 10-15 minutes, or however long it'll take depending on the USB drive. Sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia -volume /Volumes/MyVolume ![]() In order to make the bootable USB disk, open up Terminal and copy + paste this command: In order to make this Hackintosh 99%, you will either need a Mac. Now, with the setting out of the way, time to install macOS.įor me this was the easiest step as I already had the USB premade on a drive but I will paste the command that I used into this guide. I did change other settings but ended up causing a kernel panick. To access those settings, go under the boot section, set the boot mode to UEFI only boot and change the CSM support to no. Also, make the Mac drive (HDD/SSD) as the main boot drive. The settings that need to are UEFI support and CSM support to no. To do that, press the F1 key to enter the BIOS setup. In order to have a working and bootable macOS USB, we need to change some setting in the Lenovo BIOS. I will note that with the Clover EFI being posted, I'm not sure if it'll have everything working under Catalina, but mostly everything works under macOS Mojave. Now, with the specs out of the way, let's dig into this Hackintosh guide: My machine is running 10.4.6 macOS Mojave. Intel WIFI/Bluetooth 7260NGW combo cardĪs you can see, this Hackintosh from 2016 is still capable up to 10.15.7 macOS Catalina. 1TB 5400RPM WD Mechanical Drive (Currently macOS Catalina 10.15.7)ĥ. 512GB NVME Samsung OEM from Lenovo (OEM Lenovo Windows 10 Install)Ĥ. ![]() Intel Quad-Core Intel Core i7-6700HQ 2.6GHz-3.5GHz with a TDP of 45 watts with 6MB of 元 cacheģ. So, the current specs of my machine are as follows:ġ. Intel 8260ngw WIFI and Bluetooth supported (Airdrop, etc.) Up to 2 SATA SSD's or 2 NVME SSD's and 1 SATA SSD (HDD OR SSD)įully supported trackpad (mac-like trackpad) Up to 120hz (optional) 1920x1080p display IPS or a 4k UHD 3840x2160 IPS display Intel Core i7-6700hq or up to an Intel Xeon E3-1505m CPU with ECC memory. I think that this particular workstation is a step above some of its competitors from 2016 and also, for me, was a better choice for a few reasons: In this guide, I'll be hackintoshing a Lenovo ThinkPad P50 Mobile-Workstation.įrom its time period, it's one of the better built systems that has an inner magnesium-alloy inside.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |